How Ios 17 alarm not working in iphone 11


Ios 17 alarm not working iphone 11.Waking up on time is crucial for many iPhone users, so when the alarm fails to go off in the morning, it can throw off your entire day. If you recently updated to iOS 17 and now your iPhone 11’s alarm doesn’t seem to be working properly, don’t panic – there are a number of troubleshooting steps you can take to resolve the issue.

Ios 17 alarm not working iphone 11 are often due to software bugs or glitches, incorrect settings, or hardware problems. The good news is that there are several ways to troubleshoot and fix iPhone alarm issues on your own before taking your device into an Apple store or seeking tech support.

In this comprehensive guide, we will walk through the top solutions to try when your Ios 17 alarm not working iphone 11 Follow along step-by-step to troubleshoot the problem and get your reliable morning alarm back!

Recent Released:How to Fix “No iCloud Backups Are Compatible with the Version of iOS”

Steps to Troubleshoot iPhone 11 Alarm Not Working in iOS 17

Check Do Not Disturb Settings

The first thing to check whenever your iPhone alarm is not going off is the Do Not Disturb settings. To verify that Do Not Disturb is not enabled:

  1. Open the Settings app on your iPhone 11.
  2. Tap on Do Not Disturb.
  3. Make sure that the Manual toggle is off and that Do Not Disturb is not scheduled during your alarm time.

If Do Not Disturb was enabled, turn it off fully and test your alarm again. The alarm should now be able to go off at the set time. This is the easiest potential fix, so it’s best to rule out Do Not Disturb as the culprit first.

Confirm Alarm Time, Day, and Repeat Settings

If Do Not Disturb is definitely not on, the next step is to check your actual iPhone alarm settings. Open the Clock app and go to the Alarm tab to verify:

  • The alarm time is set correctly for the desired time. Double check the hours and minutes.
  • The alarm is enabled and the on/off toggle is green.
  • The days that the alarm should go off are properly selected if you don’t want a daily alarm.
  • The repeat option is set if you want the alarm to go off multiple times.

Carefully review all of these alarm settings and adjust anything that seems incorrect. Then test the alarm again the next day at the set time.

Check iPhone Volume Settings

An easy issue to overlook if an iPhone alarm is not audible is the volume levels. There are a couple different volume controls to verify:

Ringer/Alerts Volume

This controls the overall volume for all alerts and ringer tones. To check this:

  1. Go to Settings > Sound & Haptics.
  2. Drag the Ringer and Alerts slider to increase volume.

Alarm Volume

You can set the specific volume level for the alarm ringtone separate from the ringer volume.

  1. In the Clock app, go to the Alarm tab.
  2. Tap on an existing alarm.
  3. Drag the slider for the Volume level up.

Test the alarm volume again after adjusting these volume settings to maximum. If the alarm now goes off loudly, you can adjust the volumes back down to your preferred levels.

Disable Bluetooth & Wired Audio

If you listen to audio like music or podcasts through wireless Bluetooth speakers or headphones, these can sometimes disrupt iPhone alarms from sounding.

Similarly, if you fall asleep with wired headphones plugged into your iPhone, this can prevent the alarm tone from playing through the phone’s speakers.

To rule out any interference, turn Bluetooth off completely in your Settings. Also unplug any wired headphones before testing the alarm again.

Switch Up Alarm Sound & Vibration

Trying a different alarm sound and adding vibration can help troubleshoot the issue. Here’s how to change these options:

  1. In the Clock app, edit the alarm.
  2. Tap Sound to change the tone. Pick a loud, jarring option.
  3. Toggle the Vibrate control to on.

The combination of a louder sound and phone vibration may help wake you up as a backup if the sound alone isn’t audible for some reason.

Delete and Recreate Alarm

If your specific alarm time is just not going off properly, try deleting it entirely and creating a new one from scratch.

  1. Delete the faulty alarm in the Clock app.
  2. Set a new alarm time, change sound if needed, and ensure all settings are as desired.
  3. Make sure the alarm is enabled and tap Save in the top right when finished.

Test the behavior with this freshly created alarm.

Restart Your iPhone

Restarting your iPhone is one of the most basic but effective troubleshooting steps for all kinds of problems. The simple device reboot will clear out any glitches and refresh the alarm mechanisms.

To quickly restart your iPhone 11:

  1. Hold either volume button and the side button simultaneously until the power off slider appears.
  2. Drag the slider to turn off your phone completely.
  3. After about 30 seconds, hold the side button down again until you see the Apple logo to boot your phone back up.

Once the reboot is complete, open the Clock app and make sure your alarm settings are still as intended. Then wait and test the alarm at the set time.

Update iOS and Apps

Outdated system software could be the source of iPhone alarm problems, so it’s important to make sure you are always running the latest iOS version.

Updating the Clock app and any sleep apps you use for bedtime alarms is also recommended for maximum compatibility.

Here is how to update iOS and apps:

Update iOS

  1. Go to Settings > General > Software Update.
  2. Download and install any iOS update showing.

Update Apps

  1. Open the App Store.
  2. Tap your profile icon in the top right.
  3. Go to the Pending Updates section.
  4. Update the Clock app and any other apps related to alarms and sleep.

Once everything is updated, restart your iPhone and test the alarm again.

Reset All Settings

If your alarm is still not reliable after trying all other troubleshooting, resetting all device settings may resolve any corrupt files or configuration errors causing the issue. Here’s how to reset:

  1. Go to Settings > General > Reset.
  2. Tap Reset All Settings (this will not erase data).
  3. Enter your passcode if prompted.
  4. Confirm the reset when asked.

After your iPhone reboots, you will have to reconfigure some settings. Make sure to set your alarms again, double check Do Not Disturb settings, and test the alarm thoroughly.

Contact Apple Support

If all else fails, get in touch with Apple Support for assistance with your stubborn iPhone alarm problem:

  • At the Genius Bar: Book an appointment and visit an Apple Store. Genius Bar technicians can troubleshoot in person.
  • Phone support: Call 1-800-APL-CARE to speak with a support advisor by phone for help.
  • Chat support: Start a live chat session on Apple’s support website.

Apple Support can run deeper diagnostics, test alarm functions, and potentially resolve software bugs causing issues.

As a last resort, they may recommend replacing the iPhone if they determine a hardware defect is preventing the alarm from working properly.

Common Reasons for iPhone Alarm Not Working

Now that we’ve covered all the solutions, let’s discuss some of the common underlying reasons why your iPhone alarm may stop functioning reliably. Knowing the cause can help you prevent and troubleshoot the problem more easily.

Software Bug or Glitch After iOS Update

Apple usually thoroughly tests new iOS versions before release. However, bugs and glitches can still slip through that causes certain features like alarms to malfunction. Updating your iPhone and apps is the best way to patch any alarm-related software bugs.

Faulty or Outdated Clock App

While Apple’s built-in Clock app is usually stable, flaws can develop that disrupt the alarm. Similarly, if the app is outdated then it may not work properly in the latest iOS release. Updating the Clock app itself often fixes issues.

Do Not Disturb or Silent Mode Enabled

As covered earlier, if Do Not Disturb is scheduled during your alarm time or the manual option is enabled, the alarm will be silenced. Apple’s Silent Mode on the ring/silent switch can also mute alarms. Always verify these settings first.

Low Volume, ineffective Alarm Sound

Alarms may have trouble waking heavy sleepers if the sound is not loud and jarring enough. Check the alarm volume in Settings and switch to a more effective built-in tone or song.

Third-Party Alarm or Sleep App Conflicts

Using third-party alarm clock or sleep apps can sometimes interfere with the iPhone’s built-in Clock app and alarm functions. If you started having issues after installing another app, try deleting it.

Accessories Blocking Alarm Sound

Wired headphones or Bluetooth speakers can inadvertently block the alarm sound from the iPhone’s speakers. Remember to disconnect or turn off accessories before bed when using the built-in alarm.

iPhone Hardware Problem

In rare cases, a hardware issue like speaker damage could prevent the alarm from being audible. If software troubleshooting does not resolve it, this points to a potential hardware fault needing repair.

Tips to Prevent iPhone Alarm Problems

Here are some helpful prevention tips to avoid iPhone alarm issues in the first place:

  • Always keep your iPhone updated to the latest iOS version
  • Don’t use betas – only install final iOS releases
  • Update the Clock app and any sleep/health apps frequently
  • Never rely solely on third-party alarm apps
  • Use the most jarring, loudest alarm sound for heavy sleepers
  • Have a backup alarm as a safety net
  • Turn off Bluetooth and unplug headphones before bed
  • Place phone close enough to hear the alarm
  • Use phone vibration in combination with sound
  • Set multiple repeating alarms if needed
  • Double check alarm settings before going to sleep
  • Charge phone sufficiently to prevent power-off before alarm

Following best practices like these will help ensure you wake up on time and don’t miss important events, appointments, or work start times due to an unreliable iPhone alarm.

Frequently Asked Questions

Why does my iPhone 11 alarm not go off sometimes?

This is likely due to Do Not Disturb being enabled, the phone volume being too low, or a software bug. Check all settings and troubleshoot the alarm function. Update to the latest iOS version and Clock app as well.

How can I set an alarm that always works on my iPhone?

Pick a loud ringtone, enable vibration, place it next to your bed, set multiple repeat alarms, and always update your iPhone regularly to prevent alarm issues.

Why won’t my iPhone alarm stop?

If your alarm keeps ringing continuously, power cycle your iPhone and check for any alarms set repeatedly. Delete faulty alarms and recreate a proper single or repeat alarm.

Why does my iPhone alarm go off at the wrong time?

Double check that you have the correct alarm time set, the proper day selected if it’s not a daily alarm, and that AM/PM is set accurately. Recreate the alarm if needed.

How do I stop music from muting my iPhone alarm?

Turn off Bluetooth if playing music on wireless speakers. For wired headphones, always unplug them before going to sleep. Music can block alarm sounds otherwise.


Unreliable alarms are a frustrating problem for anyone who relies on their iPhone’s Clock app to wake up on time. Thankfully, iPhone alarm issues are usually caused by incorrect user settings, software glitches, or outdated apps rather than actual device hardware failures. By methodically applying the right troubleshooting techniques, you can get an unresponsive iPhone 11 alarm working properly again in iOS 17.

The key is to check Do Not Disturb, volume levels, accessories connections, all alarm settings, perform updates, and try resetting the device before panicking. Test alarms thoroughly after making changes. And remember to take preventive measures going forward like updating regularly and choosing optimal sounds.

With consistent alarms that successfully wake you up every morning, you can start each day right and on time. Just be sure to leverage the helpful troubleshooting steps in this guide whenever your trusty iPhone alarm stops functioning as expected after an iOS update. Sweet dreams!

Leave a Comment

%d bloggers like this: